What are the 6 basic structures of the three-roller bending machine? In other words, everyone will talk about problems for everyone in the current period. You can see the actual narrative below:
Three Roll Rolling Machine
(1) Left and right rollers: the key concrete components of the four-roller bending machine, the raw material is forged high-quality carbon structural steel.
(2) Sound card rack: It is divided into upper and lower sound card racks, and the sound card rack is equipped with a lower work roller bearing. There is a square buckle screw nut inside the sound card frame, and the upper surface of the screw nut is twisted with the bearing on both sides of the upper roller.
(3) Reducer: Select ZSY280 hard-tooth surface reducer and install it on the base of the steel circle together with the pull-up.
(4) Part of electrical equipment: all installed in a control box, which is conducive to the operation process.
(5) Feeding machinery and equipment: Installed on the side of the reducer as a balanced upper roller during feeding; feeding and repairing by hydraulic cylinders.
(6) Base: It is formed by welding round steel and cold-rolled steel plate. Install the sound card rack, reducer, motor, etc. on top of it, resulting in a whole.
This is the theme of the current issue. I hope everyone can grasp it immediately. If everyone has all concerns about the three-roll bending machine, please leave a message anytime, anywhere.
