The key points of maintaining the four-roller bending machine
What are the key points for maintenance of the four-roller bending machine? This means that people will talk about problems for everyone in the current period. You can see the actual narrative below:
1. Carry out actual operations in strict accordance with safety operating procedures.
2. Before starting each time, according to the time concept, designation, and quantitative analysis of the bright clean data chart, add bright clean oil. The oil should be cleaned without precipitation.
3. The CNC lathe must be cleaned frequently, and some anti-rust treatment vegetable oils in the unpainted material.
4. The bright and clean oil in the motor bearing should be replaced with filling regularly, and often check whether the work of household appliances is normal and safe.
5. Perform regular execution to check whether the V-belt, rocker, knob, and function keys can be damaged. If the damage is not optimistic, replace them immediately and report to the accessories for replacement.
6. Perform regular query to repair the power switch, proper, rocker, and ensure its work is firm.
7. 10 minutes before the end of get off work every day, polish the CNC lathe and scrub the CNC lathe.
8. It is strictly forbidden for non-specified staff to actually operate the machine and equipment. In the past, it was necessary to ensure that people leave the machine and stop.
The theme of the current period is like this. If everyone has other doubts about the four-roller bending machine, please dial the phone and ask people.
